GrindClean Lubricants range of products was developed over the last 7 years in response to customer demand. Our customers were asking for a range more efficient high performance coolants that were environmentally friendly and both OSHA and Health and Safety compliant, while at the same time economical to buy and use.

Time to get into the 21’st century

With today’s machines using more and more and exotic materials in their construction, we had to develop coolants that were corrosion neutral and also capable of maintaining the correct Ph during use. We had to consider issues such as Cobalt Leaching and air- born bacteria. We had to deliver higher flash points due to the high heat and fire potential created by today’s higher stock removal rates. We had to consider today’s modern filtration systems. Our coolants are capable of being filtered down to sub-micron levels without loss of performance enhancing additives. Finally we had to produce low viscosity oils that were stable and safe at all operating temperatures. We achieve this by using only pure oils. At GrindClean we do not use volatile dilutants to achieve reduced viscosity. We refine it that way.

All GrindClean Coolants and Fluids meet or exceed the machine manufacturers specifications and are used by many of the top toolmakers in the USA and Canada. In fact several Boeing subcontractors use and approve GrindClean coolants exclusively.

Full coolant analysis and laboratory facility at your service

No coolant company is complete without its own Laboratory. At GrindClean we have full laboratory and analytical facility where we can quickly analyze coolant and pinpoint performance or health and safety issues, make recommendations, and quickly improve cutting performance while reducing costs through higher productivity.

East or West

No matter where you are we have you covered. With locations in California and North Carolina and soon in the Mid West you can be sure that we will keep your freight costs and lead times to a minimum.

New Oil-pro lite

We are pleased to announce a new addition to our range of PURE OIL Coolants and Cutting Fluids. New Oil-Pro Lite is a super low viscosity mineral oil for today’s new grinding machines. The super low viscosity oil is ideal for grinding ceramics, quartz, PCD, PCBN as well as Carbide and Cast Cobalt alloys. Oil-Pro Lite is compatible with today’s latest filtration systems and is easily filtered down to sub-micron particle size.

Oil-Pro Lite has a class leading flashpoint of 320 degrees F. This is achieved by using pure refined oil. At GrindClean we do not use volatile thinners to achieve our low viscosity performance. We refine it that way. Because of this Oil-Pro Lite will not evaporate like some other thin, low cost oils.

Here are a few benefits of changing to Oil-Pro Lite
• Super Low viscosity of 5.9 Centistokes
promotes fast heat transfer.
• Super high flashpoint of 320 deg F.
• Super Lubricating qualities to keep
your machines like new.
• Super easy clean up for parts needing further assembly
• Contains no Chlorine to
corrode your machines.
• Contains no Sulfur to hurt
your employees.
• Gentle Peppermint scent keeps
you operators happy.
• New low Price and volume discount
structure to make your Boss happy

Why not call us today to find out more or visit our constantly updated website at www.grindclean.com to find out about our other Oil Coolants, Water Based Coolants and Soluble Oils.

For more information on this story, please contact:

Grindclean lubricants llc
403 Teague Town Road
Taylorsville, NC 28681
Phone: 828-352-9423
Fax: 828-352-9164
Web: www.grindclean.com
Email: sales@grindclean.com